Products & Services

Contact CIT

Component InterTechnologies
2426 Perry Highway
Hadley, PA USA 16130

Tel: 724-253-3161
Fax: 724-253-3853
Email:

CIT Innovations

Whitepapers

Company Profile

Small Diameter Wire Roll Forming; Small Diameter Wire Heading

Formed Dumet for MELF Diodes

Measures according to customer’s specification.
With or without connection wire.

Headed Parts

For Capacitors and other Electronic Applications.
Up to 2-1/2” (63.5 mm) OAL

Pins

Rolled at both ends

Straight cuts

Small Diameter Wire Roll Forming and Wire Heading Specifications

	Wire Forms	Cold Heading	Straight Cuts
Standard Processes Available	CIT Heading Multi-Slide Forming Pin Rollers Cold Header	CIT Heading Cold Header	CIT Heading Multi-Slide Forming Hadley Straight Cut Pin Rollers Cold Header
Temper / Finish	Hard / Soft	Hard / Soft	Hard / Soft
Typical Diameters mm (In.)	0.18 - 1.3 mm (.007 - .050 In.)	0.4 - 1.5 mm (.015 - .06 In.)	0.3 - 1.6 mm (.012 - 063 In.)
Typical Diameter Tolerance	+/- 0.0127 mm ('+/- 0.0005)	+/- 0.0127 mm ('+/- 0.0005)	+/- 0.0127 mm ('+/- 0.0005)
Typical Available Lengths mm (In.)	2.235 - 63.5 mm (.088 - 2.50 In.)	.9 - 10 mm (.0354 - .400 In.)	.5 - 102 mm (.020 - 4.00 In.) depending on process.
Length Tolerance +/- mm (+/- In.)	+/- .076 mm (+/- .003 In).	+/- .076 mm (+/- .003 In.)	+/- .076 mm (+/- .003 In.)
Packaging	Vials, plastic tubes or other customer specification.
Quality Statistical Process Control on Critical Parameters	Supplied to agreed specifications provided by the customer or per our internal specification.

Our capabilities are not limited to the above specifications, which should be
considered as general guidelines only. To review your specific requirements,
please contact us at

ROHS Compliant Precision Welding of Leadwires and Resistor Elements, Wireforms and Glass Tube Cutting for Lighting and Electronics